Flamark

mabo automatic fire extinguisher

is an automatic fire fighting product which extinguishes the fire by the dispersion of a glass ampoule containing a chemical solution which remains on the burning surface as a coating that will prevent reignition.

fire killer is absolutely the most effective system for fire extinguishing with a unique formula of solution contained in the ampoule of only 580 ml.

Features

Basic use – indoor only (closed spaces)

• extinguishes fire instantaneously and completely

• prevents reignition

Tested/approved

• for toxicity and environmental impacts by the EU-accredited laboratories, in accordance with strict and relevant standards that apply on all markets

• harmless for people and environment - environment-friendly (no pollution or negative effects on the environment, people, animals, soil and plants)

• rapid, fully biodegradable and free of residue

• does not contain bromine or chlorine

• and therefore it has zero ozone depletion potential (ODP).

Tested*/approved (efficiency) by: -the Ministry of Internal Affairs, CRS

-*ANPI, *TÜV

for class of fires

A, B: ±16 m³ (one ) B: Ø 90 cm burning area

(protected area)

(energized electric equipment - objects)

solution is dispersed like mist and there is no danger of electrical shock risk, because solution is electrically a non conductiv extinquishing agent).

Designed for the following classes of fire

Class A (fire including flammable solids such as wood, cloth, rubber, paper and some types of plastic).

Class B (fire including flammable liquids such as petrol, oil, etc.).

Class E (fire including any of the materials found in Class A and B fires, but with the introduction of an electrical appliance, wiring, or other electrically energized objects in the vicinity of the fire, with a resultant electrical shock risk if a conductive agent is used to control the fire).

Class F (K – in USA) - (fire including cooking oil and fat, such as olive oil, maize oil, sunflower oil, lard and butter...).

Operating temperature range: -25°C to +70°C

How works

• Automatic extinguishing

When a fire breaks out, the solution in ampoule reacts to the heat and when the solution reaches the temperature of 84°C, the ampoule automatically bursts open and the dispersed solution instantly

extinguishes the fire.

Automatic activation mechanism


As the temperature rises, the solution starts to dissolve and generates gas within the ampoule.	activates when the built up pressure and temperature of solution within the ampoule reach a certain point.	The ampoule ruptures and the solution is dispersed over the burning surface.

Class A

Performance measurement

Class B

Class F (K – in USA)

Extinguishing performance

While extinguishing a fire the follovving effects occur:

• Quick and strong cooling effect

When heated solution produces gases by thermal decomposition, the strong cooling effect of the gases helps to extinguish the combustibles which have exceeded their ignition point.

• Suffocation

Non-flammable gas produced by thermal decomposition cuts off oxygen from the combustibles (replacement of air with water vapour generated in a large quantity and absorption of radiation heat).

• Negative catalytic effect

The gas produced under thermal decomposition has negative catalytic action and prevents combustion chain reaction.

• Evaporation control

Water membrane produced by the foam drainage quickly spreads over the surface and controls the evaporation of combustible gas which shows cooling and suffocation effects of the foam.

• Fire retardant effect

When heated solution dissolves and forms a glass-like coating on the surface of combustibles which cuts off the oxygen, not only does it prevent the transmission of radiant heat, but it also prevents the dehydration caused by the solution produced under high temperature, creating a fire retarding effect to prevent the reignition of the combustibles.

Highly economical product

• without side effects after activation and extinguishing, that means

• no residue that can cause costly post- fire cleanup and downtime

• simply to mount (on a wall or ceiling)

• it does not require any technical knowledge

• maintenance free – by eye control only

• over 10 years of shelf life

• fully replace sprinklers – overall installation cost is 1/14 compared to water sprinkles system

• small size and light weight (88 x 307 x 61 mm /1,025g / 580 ml)

is an excellent option to protect high-value property such as:

• small ships (fishing boat or pleasure type), passenger boats, yachts (engine rooms, fuel storage)

• distribution equipment (boiling rooms, oil transformers)